Power Fist 8900797 Manuel D'utilisation page 4

8900797
2. Wear the appropriate type of full-face shield in addition to safety
goggles, as the work can create chip, abrasive, or particulate matter.
3. Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a. Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
4. Wear protective clothing designed for the work environment and tool.
5. Non-skid footwear is recommended to maintain footing and balance in
the work environment.
6. Wear the appropriate rated dust mask or respirator.
7. This tool can cause hearing damage. Wear hearing protection gear with
an appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enable better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
DANGER! Never use your hand, foot, or any other part of your body to push
material into the hopper. The chipper contains high speed rotating blades.
Use a wooden stick or branch to push the material. Failure to follow this
warning will result in amputation, serious personal injury, or death.
WARNING! Keep hands and feet away from the feeding chambers and
discharge chute while in use. Do not attempt to clear the discharge
chute while the machine is running. Material is ejected at a high velocity
and may cause an injury. Material being fed into the machine may
kickback and may cause an injury.
4
6.5 HP 208cc Wood Chipper
For technical questions call 1-800-665-8685
V1.0