Servicing Your Engine
2. Allow the used oil to drain completely, then reinstall the drain plug, and tighten
it securely. Do not over tighten. Dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take used oil in a sealed container
to your local recycling center or service station for reclamation.
Do not throw used oil in the trash, pour it on the ground, or pour down a drain.
3. With the engine in a level position, fill to the outer edge of the oil filler hole with the
recommended oil.
Engine Oil Capacities:
79cc - 12 oz (.350 liter)
98cc - 12 oz (.350 liter)
136cc - 16 oz (.473 liter)
179cc - 16 oz (.473 liter)
208cc - 16 oz (.473 liter)
223cc - 16 oz (.473 liter)
254cc - 20 oz (.591 liter)
291cc - 32 oz (.946 liter)
306cc - 32 oz (.946 liter)
369cc - 38 oz (1.123 liter)
414cc - 38 oz (1.123 liter)
420cc - 38 oz (1.123 liter)
Note: Total oil capacity could be as much as 4 additional ounces over volumes above due to
engine mounting angle and proper draining.
• NOTICE
4. Securely screw in the filler cap/dipstick.
ENGINE OIL RECOMMENDATIONS
Engine oil affects performance and service life.
Use 4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use.
Other viscosities shown in the chart may be
used when the average temperature in your
area warrants.
The SAE oil viscosity and service classification
are in the API label on the oil container. Use API
SERVICE category SJ engine oil, or higher.
CONTINUED
Running the engine with a low oil level can cause engine damage.
Max Upper Level
Min Lower Level
Liquid Combustion Technology, LLC Engines Manual 15