ACO LipuSmart-P Serie Manuel D'utilisation page 97

Menu items
(2nd line) (3rd +4th line)
Max. current P1
Max. current P2
Inspection every
Level
Baseload ON
Baseload OFF
High water level
Run time altern.
Run. Time max.
Stop delay
Settings
Explanation
Maximum power consumption for the inner
cleaning HP pump.
0 – 12 A
Automatic switching off of the inner cleaning
HP pump if the set power consumption is
exceeded.
Maximum power consumption for the disposal
pump.
0 – 12 A
Automatic switching off of the disposal pump if
the set power consumption is exceeded.
days
0 – 200 cm Current water level in the lifting plant
0 – 200 cm
0 – 200 cm
0 – 200 cm Activation point for additional pump
0 – 200 cm
0 – 200 cm High water level alarm if exceeded
The pump changeover is after the set time
in the basic load mode. After three changes
deactivated
without interruption the High water level alarm
1 – 60 min
appears in the display.
down automatically after the set Stop delay.
0 – 60 min
The pump does not start up again until the
0 – 60 s
off point.
LipuSmart-P
Operation
97