ACO LipuSmart-P Serie Manuel D'utilisation page 88

LipuSmart-P
Operation
Menu items
(top line)
Stop delay
Max. current – 1
Max. current – 2
Test Pump run 24h
Acoustic alarm
Interm. Alarm
Pump changeover
Thermal overlad
P1
Thermal overlad
P2
ATEX mode
Service mode
88
Settings
Explanation
(bottom line)
0 – 180 s
point.
Pump P1 is deactivated automatically if the power
pressed.
Pump P1 is deactivated automatically if the power
pressed.
deactivated
of the pumps have not been operated for more than
1 – 10 s
24 hours.
deactivated
Activated: In the event of a malfunction an alarm
activated
sounds.
deactivated
activated
deactivated
activated
Activated: Pump changeover after each restart.
deactivated
activated
deactivated
activated
Activated: In the event of incorrect phase sequence
deactivated
activated
and the pumps cannot be started up.
Activated: If the level sensing does not determine any
deactivated
activated
telecontrol systems.
Activated: All settings can be changed.
deactivated
activated
changed.