Malfunctions On The Lifting Plant - ACO LipuSmart-P Serie Manuel D'utilisation

6.2 Malfunctions on the lifting plant

Malfunction
function
in manual mode
vibrations in the
pressure line when
switching off the
Cause(s)
Power consumption too high
power supply
Automatic mode not switched on
Pump motor is defective
bodies
Incorrect rotational direction
Pressure line is obstructed
Pump parts are worn
Mini compressor defective
too short
Troubleshooting
for approx. 2 seconds
If malfunction persists: Contact
ACO Service
Switch on automatic mode
completely open
necessary turn 2 phases via phase
Clean the pressure line
Replace the mini compressor
Increase the stop delay period of
LipuSmart-P
115