Instructions For Installation; Technical Data; Before Installation; Safety Distances - Harvia Spirit Instructions D'installation Et Mode D'emploi

EN

INSTRUCTIONS FOR INSTALLATION

See WARNINGS AND NOTES!
See INSTALLATION IMAGES!

Technical data

Installation details
Dimensions
Sauna room
Approved accessories
Suitable control units
Spare parts

Before installation

Before installing the heater, study the instructions for installation. Check the following points:
• Is the output and type of the heater suitable for the sauna room? The cubic volumes must be followed > Technical
data .
• Is the supply voltage suitable for the heater?
• The location of the heater fulfils the minimum requirements concerning safety distances > Technical data, >
Installation Images: 2. Safety distances.
Note! Only one electrical heater may be installed in the sauna room. The heater should be installed so
that the warning texts can be read without difficulty after the installation.

Safety distances

The minimum safety distances are shown in figure 2.
It is absolutely necessary to install the heater according to these values. Neglecting them causes a
risk of fire.
Max. power
Operating voltages
Frequency
Supply cord
Connection cable type
Protection class
Weight kg
Stones
Storage temperature
Height
Width
Depth
Volume m³
Sauna room height min. mm
Embedding flange
Safety railing
C150400, C150400VKK, CX170400, CX110400, CS110400, CF9400, C170400VKK, C090400
(See the latest control unit models in our website www.harvia.com.)
Heater element 2000 W
Heater element 3000 W
Temperature sensor 125 °C
HSPE604M
6 kW
50 / 60 Hz
400 V 3N~ 5 x 1,5 mm²
230 V 1N~ 3 x 6 mm²
230 V 3~ 4 x 1,5 mm²
H07RN-F or equivalent
11 kg
Ø 5–10 cm / 60 kg
687 mm
385 mm
334 mm
5-8 m³
1900
WXY10-0015
-
WX248
HSPE904M
9 kW
400 V 3N~
230 V 1N~
230 V 3~
50 / 60 Hz
5 x 2,5 mm²
3 x 10 mm²
4 x 2,5 mm²
IPX4
12 kg
0-50 °C
687 mm
385 mm
334 mm
8-14 m³
1900
HSP1
HSP3M
-
WXZCU-830
WX248
35
EN