Menu Set Up - SKF TKES 1S Mode D'emploi

Directly on the screen, a "live" picture can be seen. This is the camera mode.
It is strongly advised to properly set-up the TKES 1S before first use. The indexing of
saved photos and videos is based on date and time only. Other parameters, if set before
first use, can make the operation of the TKES 1S easier in the future.
Press POWER button for 3-5 seconds to turn the display unit off.
The side view adapter included, is ideal for viewing pipe walls.
To fit the side view adapter, unscrew the chrome tip of the insertion tube and replace with
the side view adapter.

3. Menu set up

• Switch the unit on. Ensure that camera mode is active (i.e. a "live" picture can be seen)
• Press the OK button to access the menus. Use the UP or DOWN button to select the
menu item. Press OK to confirm.
The options displayed are as follows;
- Delete all
- Video output
- Date / time setup
- Language
- Video format
- Auto power off
- Digital zoom
- Mirror
Delete All
Take care in selecting this option, as everything will be deleted from the SD card!
Navigate to DELETE ALL in the menu, press the OK button. Select YES or NO using the
UP or DOWN buttons. Confirm with the OK button.
Video ouput (see 4.)
Date/Time Set up
Press UP button & DOWN button to select year/month/day or hour/minute/second. Press
PHOTO button to increase the value and the REC button to decrease the value.
The date and time can be displayed in the preview image mode. Use either the PHOTO or
REC button to toggle between display "ON" and "OFF":
SKF TKES 1S 7