SKF TKES 1S Mode D'emploi page 11

Reviewing and deleting saved Photos and Videos
In the camera mode, press the UP or DOWN key, the last photo or video will be displayed.
Press the UP or DOWN keys to navigate to the photo or video to be viewed.
IMG00001
2009/01/08 12:15:16
Display for saved photo
To play the video, press the photo button. Press the photo button again to pause.
To revert to Camera mode, press the ESC button
To delete a saved photo, press the OK button whilst it is displayed. To delete a saved video,
make sure the video is not in play mode, press the OK button. A delete menu will show.
Toggle between the Yes and No options using the UP and DOWN buttons. Press the OK
button to confirm.
Video output
This function allows live pictures or recorded photos and videos to be displayed on a
TV screen or beamer. First make sure that the Video format is set correctly to the used
TV system (PAL or NTSC). (See the Menu set up section.)
Connect the black video cable to the display unit TV out jack. Ensure that the other end of
the video cable is well connected to the TV or beamer.
Press the OK button to select menu options, select Video Output and press the OK button.
The display unit screen will turn black and the display will be shown on the TV. You can
transfer the screen back to the display unit by selecting the same function.
Note: The function will detect automatically if the video cable is already inserted in the
TV OUT jack. If the video cable is not inserted, then the screen image will revert to the
display unit.
10
2009/01/08
Display for saved video
14:17:22
IMG00002
SKF TKES 1S