Troubleshooting - SKF TKES 1S Mode D'emploi

Transferring Photos and Videos to a PC
The computer must be running MS WindowsTM 2000 or later.
Turn the TKES 1S on. Connect the USB cable to the display unit and the computer.
Look for the drive with the SD card files, this should look similar to the following figure:
IMG00001.JPG
IMG00009.ASF
The files can then transferred and viewed on the PC. In general, on a PC running MS
WindowsTM 2000 or later with WindowsTM Media player, no special software is required
to display JPG and ASF files.

5. Troubleshooting

No image on the display after turning the power on:
Battery is exhausted. Connect the display unit to the power adapter supplied and recharge
batteries. The TKES 1S can be used when connected to ac power.
No image, only words on the LCD monitor after turning the power on:
Check that the insertion tube is correctly connected to the display unit.
Unable to take photos or record video:
SD card not present, wrongly inserted, full or faulty. Check SD card is present, check SD
card insertion, check SD capacity, check if SD card is faulty (check if SD card works in
other devices).
Shut down:
When all functions freeze or fail, insert an insulated needle into the hole on the back of
the main unit. The system will restart automatically.
SKF TKES 1S 11