Toshiba MMW-AP0271LQ-E Manuel D'installation page 65

<RBC-AMS55E-ES/EN>
Field setting menu(1/2)
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
Set
Test mode
Test mode start.
Return
Yes No
(1)
Room A 12:00
Test
Heat
Mode Fan Speed
(2)
Room A
12:00
Test
(3)
Test mode
Test mode stop.
Return
Yes No
127-EN
1
∧ ∨
Push the [ ] / [ ] button to
select "1. Test mode" on the "Field setting
menu" screen, then push the "
Set
Set" [ F2] button.
Pushing the " Yes" [ F1] button
Yes
sets the test mode and the screen returns to the
"Field setting menu" screen.
Push [ CANCEL ] twice, the screen (2)
appears.
2
Push the [ ON / OFF ] button to start the
test mode. The screen (1) shown in the left
appears. (The screen (2) appears when the
operation is stopped.)
Perform the test mode in the "Cool" or "Heat"
mode.
Temperature setting cannot be adjusted during
the test mode.
Check codes are displayed as usual.
3
When the test mode is finished, push the
∧ ∨
[ ] / [ ] button to select "1. Test
mode" on the "Field setting menu" screen,
then push the " Set" [ F2]
Set
button.
The screen (3) appears.
Pushing the " Yes" [ F1] button
Yes
stops the test mode screen and continues the
normal operation.
NOTE
The test mode stops after 60 minutes and the screen
returns to the normal / detailed display.
Using the Service monitor with the [
Room A
12:00
Test
Heat
Mode Fan Speed
Monitor function
Code Data
00 0024
Return
Monitor function
Code Data
00 0024
Return
– 64 –
MONITOR] button during the test mode
Push the [ MONITOR] button
1
∧ ∨
Push the [ ] / [ ] button to
select "4. Monitor function" on the "Field
setting menu" screen, then push the
" Set" [ F2] button.
Set
∧ ∨
Push the [ ] / [ ] button to select
the code to check data.
2
Refer to the Installation Manual supplied
with the indoor unit or outdoor unit or
service manual for details about the check
code and data.
3
Push the [ CANCEL] button to return to
the "Field setting menu" screen.
128-EN