Attaching The Fan Blades - Kichler 52 Range LED Manuel D'instruction

FINISHING THE MOTOR INSTALLATION
or
Step 3. Securely attach and tighten the canopy hole cover over the shoulder Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17) screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)

ATTACHING THE FAN BLADES

NOTE: Before continuing, make sure the power is disconnected by turning NOTE: Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box. off the circuit breaker or removing the fuse at the circuit box.
Step 1. Step 1. Install the 6 blades onto the motor by using the screws provided, Install the 6 blades onto the motor by using the screws provided,
tighten them securely. (Fig.18) tighten them securely. (Fig.18)
12 | KICHLER.COM
Canopy Hole Cover
Fig. 17
Blade
Blade Screw
Fig. 18