Attaching The Fan Blades - Kichler 300319 Mode D'emploi

FINISHING THE MOTOR INSTALLATION
Step 3. Step 3. Securely attach and tighten the canopy hole cover over the shoulder Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17) screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)

ATTACHING THE FAN BLADES

NOTE: Before continuing, make sure the power is disconnected by turning NOTE: Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box. off the circuit breaker or removing the fuse at the circuit box.
Step 1. Step 1. Insert the blade through the slot on the motor housing, as shown, Insert the blade through the slot on the motor housing, as shown,
secure with the screws and washers provided. Repeat process with the other secure with the screws and washers provided. Repeat process with the other
blades. (Fig. 18) blades. (Fig. 18)
Canopy Hole Cover
Fig. 17
Blade
Fig. 18
52" Dawn LED | 11