Haverland HT10PCT Manuel D'instructions page 40

2. Press PRG again to move to the setting of "heating mode of different period (00:00-24:00)". Press
button to choose hours, and
3. After 30 seconds it will automatically save program settings.
4. TEMPERATURE SETTING
Under the mode of comfort mode
or to choose the desired temperature. It can be adjusted between 5℃ and 29℃
pilot modes and between 1.5 ° C and 25.5 ° C for ECO mode. The temperature difference between the ECO
mode and the COMFORT mode is 3.5 ° C. Each time you press the buttons to adjust the temperature, you
increase or decrease the temperature by 0.5 ° C. Press other buttons except
after 5 seconds it will automatically finish. The room temperature sensor can automatically adjust the
temperature. When the room temperature is higher than the selected temperature, the heater will stop heating.
5 KEYBOARD LOCK
M
Press button for three seconds to activate the keyboard lock function
again for three seconds.
Remarks:
1. The keyboard lock function doesn't lock the standby
2. The keyboard lock function will automatically be deactivated under below circumstances.
1) the appliance is turned off by pressing standby
2) the appliance suffer power disconnection
You need to set again by pressing M for 3 seconds if you need this function.
6. Window detector function
Press button to enter window detector function. The appliance will enter comfort mode as default.
If temperature decrease detected, the appliance will automatically enter anti-freeze mode. If temperature
rises up, the appliance will go back to comfort mode. You can press M or PRG button to choose other
modes, or press standby button to enter standby mode.
REMARKS: under window function, pilot control is not available.
7. REMARK
to choose comfort mode for 24 hours.
P
,pilot mode or Eco mode
18
(excluding Antifreezing mode
/
, in order to unlock, press
Keyboard lock
button.
button.
), press
for
comfort and
to finish the setting, or
M