Haverland HT10PCT Manuel D'instructions page 32

spirit level and mark the location of 4 holes on the
wall. Drill 4 holes in the wall using a drill adapted
to the diameter of pegs. Insert the pegs into the
holes, then screw securely wall mount bracket
onto the wall. (Figure 3)
4. Place the heater against bracket (Figure 4):
A : Fix the heater on the 2 hooks that are
downwards.
B : Pull the heater upwards whilst keeping it
in the 2 lower hooks.
C : Fix the heater on the 2 hooks that are
upwards.
D : Pull the heater down.
5. Slide the metal slice into the hole, and fasten the
screw to lock the wall mount bracket (Figure 5).
Model no. /
REF.
L(mm)
TECHNICAL SPECIFICATIONS
Model
REF
Rated Voltage
Rated Frequency
Rated Power
HT10PCT /
MEDUSA-10
185
HT10PCT HT15PCT
MEDUSA-10 MEDUSA-15
230 V ~ 230 V ~
50 Hz 50 Hz
1000 W 1500 W
HT15PCT /
MEDUSA-15
335
HT20PCT
MEDUSA-20
230 V ~
50 Hz
2000 W
10
HT20PCT /
MEDUSA-20
335