Modine ECO AGS1 Manuel Technique page 38

AGS3
Access
8 10 Remove drain connection R1 and ensure that it does not hamper with the handling of the fan shroud L1.
8 11 Unscrew the fixing screws "D" of the fan shroud L1 to the internal drip tray L3; unscrew the fixing screws "C" from inner
side panels L2, remove baffle L4 and bring fan shroud L1 to the position shown in the figure.
8.12 Loosen the self-threading screws "A", without removing them completely.
8 13 Unscrew self-threading screws "B", then remove side panel L6.
Reassembling
8 14 Reposition side panel L6 and fasten it with screws "A" and "B".
8 15 Take fan shroud L1 to its original position ensuring that the side panels L6 are inside and fasten it with screws "C".
8 16 Reposition baffle L4 and fasten screws "D" to the inner drip tray L3.
8 17 Reassemble the drain connection R1.
L1 = Fan shroud
L2 = Inner side panel
L3 = Inner drip tray
L4 = Baffle
L5 = Supports
L6 = Side panel
R1 = Drain connection
SD = Junction box (fans and heaters)
= Ground pole
38
www.modine.com
Figure 5