sauermann Si-83 Mode D'emploi page 8

EN
The Si-83 tank pump from Sauermann is perfect for residential A/C (EU: up to 20 kW, US: up to 20 kW / 60,000 BTU) and heating
units EU: (up to 40 kW, US: 73 kW / 250,000 BTU).
Technical features: SI83CE01UN23 - SI83CE41UN23 -
SI83CE71UN23 - SI83CE02UN23 - SI83CE42UN23 -
SI83CE42UN23 - SI83CE04UN23 - SI83CE74UN23 -
SI83CE05UN23 - SI83CE07UN23
EN
Mains supply
Safety switch
Max discharge head
Water levels (mm)
Sound level in application at 1m
Max. condensate temperature
& acidity
Tank capacity
Thermal protection (overheating) 120°C (auto-reset)
Duty cycle
Protection
Condensate inflow rates (l/h)
The head losses defined in this table are calculated with a Ø 10 mm
int. hose.
Discharge
head
5 m
1 m
2 m
3 m
4 m
5 m
WARNING
- This pump has been designed for use with water only.
- This pump has been designed for indoor use only. It must not be immersed and/or placed in areas of high humidity or where the
ambient temperature conditions are below freezing.
- The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction.
- Children should be properly supervised to ensure they do not play with the appliance.
- In case of breakdown, in particular if the supply cord is damaged, it must be replaced by a Sauermann service agent or a similarly
qualified person in order to avoid any hazard.
- For models fitted with a supply cord without a plug, a means for disconnection must be incorporated to the fixed wiring in accor-
dance with local wiring rules.
- The pump shall not be installed in air handling spaces (such as a plenums or the airhandling compartment of a condensing unit).
WARNING:
Risk of electric shock. This pump is supplied with a grounding cable and a grounding attachment plug. To reduce
the risk of electric shock, ensure that the pump is connected only to a suitable grounding device.
8
230V~ 50Hz - 115 W - 1.4 A
SI83CE01UN23, SI83CE02UN23,
SI83CE04UN23, SI83CE05UN23,
SI83CE07UN23
: NC: 5 A resistive 250 V
SI83CE41UN23, SI83CE42UN23,
SI83CE43UN23
: NO: 5 A resistive 250 V
SI83CE71UN23, SI83CE74UN23
5 A resistive 250 V
5.4 m
Fig. 3
≤ 45 dBA (Measured in Sauermann acoustic
lab, pump operating with water)
55°C, 80°C short peaks pH>2.5
2.0 l
7%: 16s ON - 212s OFF
IP 44
Total tube length
10 m 20 m
26 23 17
22 19 14
19 16 11
13 10 7
8 6 4
Technical features: SI83UL03UN12 - SI83UL03UN23 -
SI83UL02UN12 - SI83UL42UN12 - SI83UL72UN12 -
SI83UL02UN23 - SI83UL42UN23 - SI83UL72UN23
Mains supply
Safety switch
: NC/NO:
Max discharge head
Water levels (mm)
Max. condensate temperature &
acidity
Tank capacity
Thermal protection (overheating)
Duty cycle
Protection
Condensate inflow rates (gph)
The head losses defined in this table are calculated with a Ø 3/8'' (10 mm)
int. hose.
30 m
Discharge
head
13
13
3 ft (1 m)
8
7 ft (2 m)
6
10 ft (3 m)
-
13 ft (4 m)
16 ft (4.9 m)
20 ft (6 m)
SI83UL03UN12, SI83UL02UN12,
SI83UL42UN12, SI83UL72UN12:
120 V~ 60 Hz - 84 W - 1.7 A
SI83UL03UN23, SI83UL02UN23,
SI83UL42UN23, SI83UL72UN23:
230 V~ 60 Hz - 126 W - 1.55 A
SI83UL03UN12, SI83UL03UN23
SI83UL02UN23, SI83UL02UN12:
NC 5 A - 42 V peak
SI83UL42UN12, SI83UL42UN23:
NO 5 A - 42 V peak
SI83UL72UN12, SI83UL72UN23:
NC/NO 5 A - 42 V peak
21' (6.4 m)
Fig. 3
131°F (55°C), 176°F (80°C) short
peaks pH>2.5
½ gallon (2.0 l)
248°F (120°C) (auto-reset)
7%: 16s ON - 212s OFF
IP 44
Total tube length @ 120 V / 230 V
16 ft 30ft 60ft
(5 m) (10 m) (20 m)
7,6/9,7 6,6/7,8 4,8/5,7
6,4/9,1 6,3/7,5 4,5/5,4
6,4/8,1 5,9/7,1 4,3/4,7
6,1/6,3 5,6/5,8 3,8/4,1
4,6/4,7 3,8/4,2 2,8/2,9
2,5/3,6 2,2/2,5 1,8/1,9
100ft
(30 m)
3,9/4,8
3,8/4,5
3,4/4,2
2,9/3,7
2,1/3,5
1,2/1,7