Alarm Buzzer; Pan Tilt Zoom; Scan Activated Cameras; Memory Card Overwrite - SCS Sentinel DWS Manuel D'installation Et D'utilisation

EN

ALARM BUZZER

PAN TILT ZOOM

SCAN ACTIVATED C AMERAS

MEMORY CARD OVERWRITE

2. Please only use the provided memory card within the package to avoid operation error.
3. When memory card is full, system will display «MEMORY FULL PLEASE FORMAT» on preview
screen. Please be sure to backup the data before you format the memory card.
Select ALARM BUZZER, press the MENU button to turn buzzer
ON or OFF.
If you set it ON, the alarm will activate when movement
triggers a motion sensitive recording. Press the icon again to
set it OFF.
Note: The SD card must be inserted and have suffi cient
space for the alarm buzzer to operate.
Select PAN TILT ZOOM, press the MENU button to enter
ZOOM mode, press MENU
again to zoom in (2X).
When zooming in, use ▲▼ ◄► to select various view
areas. Press MENU to zoom out.
In zoom out (1X), use ▲▼to change available channel.
Press ESC to exit ZOOM.
Select SCAN ACTIVATED CAMERAS, press MENU once to
begin camera scan mode. NOTE:
1. Camera ON/OFF setting in CAMERA SETUP section
will affect which camera(s) can be
displayed during IDLE DISPLAY.
2. System will automatically activate QUAD display if
recording function is activated.
Select MEMORY CARD OVERWRITE, press MENU to activate
overwrite function and press
MENU again to deactivate. NOTE:
1. One of the following examples will appear on MAIN
MENU.
(1) Available capacity on memory card.
(2) ERROR - either memory card is missing, locked or
damaged.
- 48 -