Multi Channels Idle Display; Default - SCS Sentinel DWS Manuel D'installation Et D'utilisation

Multi Channels Idle Display

1. Use ◄► to select: DISPLAY QUAD DURING IDLE / AT 5 SEC INTERVALS / AT 10 SEC INTERVALS /
AT 15 SEC INTERVALS, press MENU to confirm selection.
2. Press ESC to save and exit.
NOTE :
1. Camera ON/OFF setting in CAMERA SETUP section will affect which camera(s)
can be displayed during IDLE DISPLAY.
2. Audio will be available during QUAD mode, either by default on channel 1, previous pre-
viewed channel or on channel triggered by motion.
3. Audio channel will stay connected until channel switched.

Default

(Display QUAD mode)
(10 sec Intervals)
1. Use ◄► to select the system language for SYSTEM
RESTORE.
2. Press MENU to confirm selection and system will
restore to factory default.
- 47 -
(5 sec Intervals)
(15 sec Intervals)
EN