System Setup - SCS Sentinel DWS Manuel D'installation Et D'utilisation

1) Starting / Time:
Start Time = PM10:33
End Time = PM10:43
(2) The type of recorded file (Schedule / Motion / Manual) is indicated by:
= Channel 1 is SCHEDULE recorded file
= Channel 1 is MOTION recorded file
= Channel 1, 2, 3 and 4 are MANUAL recorded files
To playback recorded file, use ◄► to highlight RECORDED FILE.
Press MENU to confirm selection and playback selected file.
NOTE: By default, playback display will be QUAD (displaying images of all cameras paired to
receiver).
■ □1 □2 □3 □4 = All channel playback
For single camera display, press MENU once after playback started to PAUSE.
Use ◄► to select from channel to channel.
Channel indicator (bottom left screen) will indicate the channel number selected.
□ ■1 □2 □3 □4 = Channel 1 playback in full screen
□ □1 ■2 □3 □4 = Channel 2 playback in full screen
□ □1 □2 ■3 □4 = Channel 3 playback in full screen
□ □1 □2 □3 ■4 = Channel 4 playback in full screen
NOTE : 1. For other control function available during playback mode, please refer to section
4 . RECEIVER PANEL INTRODUCTION.
2. Package purchased containing software for playback recorded file(s) on PC.

SYSTEM SETUP

1. Select SYSTEM SETUP, press the MENU button to enter
sub-menu.
2. Use ▼▲ to select the sub menu [DATE AND TIME]
[TV OUTPUT] [POWER SAVING] [MULTI CHANNELS IDLE
DISPLAY] [DEFAULT]
- 45 -
EN