Setup Masking Area; Record Time; Event List - SCS Sentinel DWS Manuel D'installation Et D'utilisation

EN

Setup Masking Area

1. Use ▲▼ to select SETUP MASKING AREA section
2. Use ◄► to highlight camera for setup, press MENU to enter
3. Use ◄► ▲▼ to highlight the grid for motion detection area. Use the MENU button to mask/
unmask grid(s). Movements taking place inside masked area will be ignored.
4. Use ◄►▲▼ to select another grid for setup or press ESC to save and exit.

Record Time

EVENT LIST

1. Use ▲▼ to select RECORD TIME section
2. Use ◄► to highlight recording period: 2 Min / 5 Min / 10 MIN, press
the MENU button to confirm
3. Press ESC to save and exit.
Playback
1. Select EVENT LIST, press the MENU button to enter sub-menu.
2. Use ◄► to highlight desired DATE index for playback. Press MENU
to confirm selection and enter selected folder.
3. Press ◄► to select Hour (each block represents one hour time).
Press MENU to enter.
4. Use ◄► to highlight desired HOUR for playback. Press MENU to
confirm selection and enter selected folder.
NOTE: Each RECORDED FILE folder indicated with file start / end time
and type of file recorded.
- 44 -