Burkert 2000 Mode D'emploi page 18

Installation and commissioning
Actuators D-50 to F-80
Screw adapter (Figure 10) instead of transparent
cap onto actuator
Screw electrical position repeater (Figure 10) into
adapter
Electrical connection: (Figure 13)
- Loosen cap screw on the appliance socket
and remove
- Loosen screw in the cap and remove contact
insert
ATTENTION!
- Lead cable through coupling nut
- Make connection as per circuit diagram
- Max. rating :
- Place contact insert in the cap and screw on
- Screw on appliance socket, assuring proper seating of the flat seal
Test valve for function and leaktightness
Actuators G-100, H-125, Types 2030, 2031
Screw threaded sleeve onto actuator spindle
Further installation as for Actuators D-50 to F-80
Actuators K-175, L-225
Installation as for Actuators D-50 to F-80
16 - 2000/2002/2012/2030/2031
Do not bend switching element!
5 A at 250 V AC
0.25 A at 250 V DC
1. Input
2. Break contact
3. Make contact
Figure 13: Appliance socket