Eggs Function - Zavor LUX LCD ZSELX01 Manuel D'utilisation

6. Choose your desired setting by turning the dial. Press the dial to select the
setting. The preset pressure level (High or Low) and cooking time appears at
the top of the screen (excluding White Rice).
If you wish to adjust those settings, turn the dial to select the pressure level
(High or Low) and then press the dial or the ADJUST button to confirm it. The
cooking time then starts blinking to show it can be adjusted. Change the time
by turning the dial and set your time by pressing the START/STOP button.
NOTE: Pressing the ADJUST button only switchs the programming option
between pressure level and cooking time.
7. After you press the START/STOP button, the screen turns green, and it displays
the programmed setting and time at the top. You also see the preheat icon on
the bottom of the screen and the preheating bar, which shows you how far
along in the preheating process the unit is.
NOTE: If you forget to press the START/STOP button, the unit beeps, the
cooking icon appears at the bottom of the screen twice after 30 seconds, the
light on the screen turns off, and the unit returns to standby mode.
8. Once pressure builds entirely, the unit beeps and it starts to count down your
cooking time. The floating valve located on the lid rises indicating, that there is
pressure inside the unit.
NOTE: When using the White Rice setting, only the outer display lines shows
once the temperature has reached. There is no preset cooking time for this
setting as the unit itself detects the water levels in the unit and beeps once the
rice steamed correctly. The cooking time depends on how much rice you are
cooking.
WARNING: NEVER TRY TO FORCE THE LID OPEN WHILE YOU ARE
COOKING UNDER PRESSURE, CAN RESULT IN A SERIOUS ACCIDENT.
WARNING: NEVER DEEP FRY OR PRESSURE FRY IN THE MULTI-COOKER.
IT IS DANGEROUS AND MAY CAUSE A FIRE AND SERIOUS DAMAGE.
9. When the cooking time ends, the unit beeps and switches to the KEEP WARM
function. The unit beeps periodically to let you know that there is pressure
inside the unit. Once you release the pressure, the unit stops beeping, and
remains on the KEEP WARM function. Press the START/STOP button to cancel
the program.
10. After the cooking time is up, release the pressure. You have two options for
releasing the pressure:
a. Quick Release Method: Release the pressure immediately by turning the
pressure regulator knob to STEAM.
CAUTION: THE STEAM COMING OUT OF THE COOKER IS HOT, AND MIGHT
CONTAIN DROPLETS OF HOT LIQUID. BE SURE TO USE POT HOLDERS,
OVEN MITTS OR A KITCHEN TOWEL WHEN RELEASING PRESSURE.
b. Natural Release Method: Release the pressure by shutting the unit off
completely: this allows the pressure to drop naturally without turning the
pressure regulator knob to STEAM. Natural Release Method takes several
minutes, during which the food inside continues cooking. Some recipes (such
as quinoa) benefit from extra cooking time. You know when the pressure has
been released because the floating valve drops and can open the lid.
11. Once all the pressure is released, remove the lid by turning it clockwise, lifting it
and tilting it away from yourself to avoid getting burnt by any remaining steam
or hot water condensation dripping from the inner portion of the lid.
32
WARNING: AFTER COOKING, THE REMOVABLE COOKING POT IS HOT.
USE POT HOLDERS, OVEN MITTS OR A KITCHEN TOWEL TO HANDLE IT
OR LET IT COOL DOWN BEFORE REMOVING.
White Rice Setting - Traditional Rice Cooker
This program allows you to cook rice as a traditional rice cooker, with steam.
1. Place the removable cooking pot into the multi-cooker and add the ingredients.
2. Place the lid on the cooker; align the protruding pin on the handle with the
condensation collector (open lock symbol), and turn it counterclockwise until
the locking pin clicks into place. Turn the pressure regulator knob to STEAM.
3. Turn the dial until the GRAINS function is selected (the words blink) and confirm
it by pressing the dial. The screen shows the settings for this function to the
right. Turn the dial to the White Rice setting and press the dial to select.
NOTE: There is no need to adjust the time since the unit do it automatically.
4. Press the START/STOP button to begin cooking. The screen turns green, and
you see the cycle lines, 10 minutes of cooking time, the preheat icon on the
bottom of the screen and the preheating bar which shows you how far along in
the preheating process the unit is.
5. Once the preheating process is over, the cooking callout appears and the unit
begins counting down. After 10 minutes is up, the unit switches to Keep Warm.
You can now open the lid

Eggs Function

This function allows you to prepare your favorite egg recipes such as hard-
boiled and soft boil eggs, omelets, deviled eggs, egg salad, and many more.
For recipes, please see the cookbook included with this unit. Please note that
the Eggs function is a pressure cook function.
33