Initial Operation; Inserting Batteries (Or Rechargeable Batteries) In Remote Control; Attaching Telescopic Antenna To Remote Control - Reely 23 44 75 Notice D'emploi



9. Initial operation

a) Inserting Batteries (or rechargeable batteries) in Remote Control
• Open the battery/rechargeable battery compartment on the bottom on the transmitter.
• Insert 8 type mignon/AA batteries with correct polarity. On the side of the battery compartment, there is a corresponding
illustration. Alternatively you can use 8 rechargeable batteries.
• To close the battery compartment, replace the battery compartment lid as shown in the illustration below. The front
edge of the rounded part is directly pushed onto the battery positioned underneath (see arrow).
Now the rounded part can be slightly pressed downward and toward the left, afterwards the lid can be pushed in
and it clicks into place.
As already mentioned, you can of course also use 8 rechargeable batteries instead of 8 normal batteries.
In order to be able to use the charger socket on the transmitter, rechargeable batteries must
inserted! Recharging normal batteries is not possible, risk of fire and explosion!
To charge up rechargeable batteries a suitable charger is necessary (not included in delivery). Please
note chapter 8 on this subject, description to (D).
b) Attaching Telescopic Antenna to Remote Control
Put the telescopic antenna into the opening on the front of the remote control and screw it tight (turn in clockwise
direction). But please don't use any force, do not use any tools to screw it in.
34