Cable Plug En 175301-803 (Type 2508, Supplied) - Burkert 8030 Manuel D'instructions

4 iNSTALLATiON

4.3.1 cable plug EN 175301-803 (type 2508, supplied)

2
3
1
4
5
- Extract part [4] from part [2]
- Unscrew cable gland [5]
- Insert cable into part [2] through cable gland [5]
- Wire part [4] as described in paragraph 4.3.2 or 4.3.3
- Insert part [4] back
- Fasten cable gland [5]
- Place gasket [3] between the cable plug and the fixed
connector
- Connect the cable plug to the sensor
- Fasten screw [1] to ensure tightness and correct electrical
contact.
Flow sensor 8030