Switch / Button Functions - Stealth Cam STC-GX45NGW Manuel D'instructions

3 Position Switch
!
OFF position: The unit will be OFF when the switch is in this position.
!
ON position: When the camera is in the ON position, the LCD screen will display the
STEALTH CAM logo for 2 seconds while the unit powers on.
!
TEST position: This position is to test the PIR sensor. When the PIR sensor detects motion,
the green LED on the front of the camera will come on for 1 second and then shut off. Will
display the software version.
Button Function
!
MENU button: This button will let user toggle between Auto Mode and Main Menu screen.
NOTE: Press the Menu Button and this will take the user back to the Main Menu Screen. Pressing
the Menu Button again will take the user back to the Auto Mode.
!
ENTER button: This button will let user select the setting option. When in Edit Mode, Press
ENTER button to finalize value. If file is a video, ENTER button will start and stop playback.
!
RIGHT/LEFT button: These buttons allows users to select their options to advance to the
next option or recede from previous option.
EXAMPLE: When QSET's appear at the top left corner of the screen, pushing the RIGHT button
increasingly changes the QSET's from 1 to 3 and pushing the LEFT button decreasingly changes the
QSET's from 3 to 1. Also when in Camera Setup mode, press the RIGHT/LEFT button to navigate
between Photos or Videos.
!
UP/DOWN Button: These buttons will let the user toggle from Playback, Camera setup,
Advance Settings, and Back in the Main Menu screen. When in Camera Setup mode, press
UP/DOWN button to change value.
www.stealthcam.com
877-­‐269-­‐8490
SWITCH / BUTTON FUNCTIONS
Page
7