!
Operational Mode: The icons are displayed in the mode the camera is currently operating
under and they are QSET 1, QSET 2, QSET 3 and CUSTOM. The second line will display PIR
Photo, PIR Video or TL (Time Lapse). Camera setting visibility is dependent on selected
Operational Mode.
!
Photo / Video Count: The icon is displayed the total number of photos/videos taken in the
top right corner of the screen. The photo and video count will be displayed in 5 digits. This
icon will be visible in any Operational Mode.
!
PIR, Video Resolution or Time Lapse Delay: The icon is displayed in the bottom left corner
of the screen for PIR & Time Lapse [MM:SS] Delay where MM are the minutes and SS are the
seconds. This icon will be visible in any Operational Mode.
!
Battery Life: The battery life will be displayed in the bottom right corner of the LCD screen
(100%, 99%, 98%, etc...) along with the battery symbol. This icon will be visible in any
Operational Mode.
NOTE: If the DC jack is used, then the camera will display "EXT".
!
Photo Burst: Number of photo burst setting will be displayed in the bottom center of the
screen. This icon will only be visible in PIR Photo Operational Mode.
!
Countdown Delay: This number will countdown from 30 seconds indicating how much time
you have remaining before the camera is armed and ready.
www.stealthcam.com
877-‐269-‐8490
ON-‐SCREEN DISPLAY ICONS
Page
9