Stealth Cam STC-GX45NGW Manuel D'instructions page 15

CAMERA SETUP (cont.)
!
Activity Control (Default – Always ON): This setting tells the camera what specific hours to
operate "scheduled" or to "always" be on.
o
Always ON
o
Scheduled
!
Start (Default-­‐08:00AM)
o
!
End (Default-­‐05:00PM)
o
NOTE: Activity Start/End settings are visible only if Scheduled is selected
!
Photo Resolution (Default – 4.0 MP): This setting determines the quality of the photo.
o
12.0 MP (4032 x 3024)
o
8.0 MP (3840 x 2160)
o
4.0 MP (2688 x 1520)
o
2.0 MP (1920 x 1080)
!
PIR Delay (Default – 5 sec): The camera will wait a specified amount of time between PIR
photos.
o
The PIR Delay range is from 5 seconds to 59 minutes and 59 seconds.
o
The 5-­‐second option will remove the PIR Photo Delay. The camera will take a photo(s),
save the photo(s) and then become ready to take another photo(s) with no delay.
o
The 5-­‐second option will allow the camera to stay awake for 2sec after the previous
photo was taken. This will allow for the camera to quickly take another photo without
taking extra time for the camera to fall asleep and then wake up again.
www.stealthcam.com
877-­‐269-­‐8490
Time ranges from 00:00 to 23:59 [HH:MM]
Time ranges from 00:00 to 23:59 [HH:MM]
Page
15