Switch / Button Functions - Stealth Cam STC-GXATW Manuel D'instructions

3 Position Switch
OFF position: The unit will be OFF when the switch is in this position.
!
ON position: The unit is now ON, defaults to Qset1 on first power up. After
!
each time the camera is turned ON, the unit will remember the previous
mode and settings.
TEST position: This position is to test the PIR sensor. When the PIR sensor
!
detects motion, the green LED on the front of the camera will come on
for 1 second and then shut off. Will display the software version.
Button Function
MENU button: This button will let user access the Camera and Wireless Settings.
!
• Capture Settings that are access while in any Qset Mode will place the
camera in CUSTOM Mode on menu exit.
NOTE: MENU Button functions as a "Back" button feature within the menus. While on the
top level of the Menus (Camera Settings & Cellular Settings) MENU Button will save and exit.
ENTER button: This button will let user select the setting option. This will also take a photo
!
when the camera is in count down delay.
Directional Buttons: These buttons will let the user to navigate the Camera Setup and
!
button to change value. LEFT/RIGHT are used to navigate multiple fields within an option.
Wireless Setup Menus. When in Camera Setup or Wireless Setup mode, press UP/DOWN
www.stealthcam.com
877-­‐269-­‐8490
SWITCH / BUTTON FUNCTIONS
7
Page