Stealth Cam STC-GX45NGW Manuel D'instructions page 16

CAMERA SETUP (cont.)
!
Reduce Blur (Default – Advanced)
o
ADVANCED – This setting will use a maximum exposure time of 1/40sec for the night
photos. Other adjustments are made to increase the brightness and clarity of the
photo.
o
STANDARD – This setting will use a maximum exposure time of 1/15sec for the night
photos.
!
Photo Burst (Default – 1 Photo)
o
Capturing options will be 1 to 9 images with a 1.0 sec delay.
o
The options are 1 Photo, 2 Photos, 3 Photos, 4 Photos, 5 Photos, 6 Photos, 7 Photos, 8
Photos, and 9 Photos.
!
Camera Name (Default – STEALTH CAM)
o
The camera name is imprinted on each of the photos.
o
The name is limited to 13 characters.
!
Security Key (Default – Off): This function turns the Security Key ON or OFF.
o
Security Code (Default – 0000)
!
This feature will prevent a user from accessing any of the options on the camera
unless the user enters a 4 digits security code first.
!
The security code will be 4 digits and each digit can be any number 0-­‐9 or letter
A-­‐Z.
!
The security code must be entered if the number is not the default.
!
If the security code is the default number, then the user does not need to enter
the code.
!
If the user cannot remember the correct security key, then the camera can be
unlocked using a "key code". You will need to contact the Customer Service Dept
for assistance at 877-­‐269-­‐8490.
www.stealthcam.com
877-­‐269-­‐8490
Page
16