Functions & Features 10 - Stealth Cam STC-GX45NGW Manuel D'instructions

Start Up
When the unit is powered ON for 2 seconds, the Stealth Cam logo will be displayed on the screen.
After 2 seconds, the unit will show the Auto Mode screen. (Shown on Page 8)
Auto Mode
The screen will show what the camera sensor sees in real time when the camera is awake.
!
If the Menu button is pressed while in Auto Mode, the camera will enter the camera's Main
Menu Setup Mode.
!
If the Enter button is pressed while in Auto Mode, the camera will go in a capture mode to
take photos or videos, depending on the current settings.
!
After 60 seconds of inactivity while in Auto Mode, the camera will enter Sleep Mode.
!
If the camera is re-­‐awaken or turned completely off and then turned back on, it will go to
the last mode it was in (i.e. QSET 1, QSET 2...).
Quick Sets (QSET)
When the unit is first powered ON, the unit will remember the previous settings that were used
by the user. For example, if the user was previously using QSET 2, then the camera will power ON
to the QSET 2 mode. The same also goes for the Custom setting.
Also when the camera is displaying QSET 1 on the top left corner of the screen, the user can
toggle the different QSET's by pushing the LEFT or RIGHT Buttons. The RIGHT button will
increment go up by 1 (i.e. QSET 1, QSET 2, QSET 3). The LEFT button will decrease by 1 (i.e. QSET
3, QSET 2, QSET 1).
www.stealthcam.com
877-­‐269-­‐8490
FUNCTIONS & FEATURES
Page
10