Human Touch Perfect Chair PC-420 Mode D'emploi Et D'entretien page 8

S
Install the power hub
1. Gently tip the chair forward onto the footrest (Fig.11).
2. Locate the four screw holes on the rear of the front cross bar.
3. Using the provided Phillips-head screwdriver and screws, secure the power hub to the chair with the
power cord facing to the right (Fig.12).
humantouch.com
Front cross bar
Fig.11
Power hub
Fig.12
10
4. Plug the transformer into the power hub receptacle, then feed the transformer cable up
through the hole in the chair canvas (Fig.13).
Fig.13
5. Gently return the chair to the upright position.
Feed transformer cable
Plug in transformer
11 11