Human Touch Perfect Chair PC-420 Mode D'emploi Et D'entretien page 5

put it together
Install the footrest frame
1. Remove the footrest frame screws.
Using a Phillips-head screwdriver, remove
the two screws from the footrest frame.
Retain them for use in step 3 (Fig.1).
2. Slide the footrest frame into the chair frame.
Slide the two ends of the footrest frame into the
holes in the front of the chair frame (Fig.2).
humantouch.com
Fig.1
Fig.2
4
3. Replace the footrest frame screws.
Using a Phillips-head screwdriver and the
two provided screws, secure each side of the
footrest frame to the chair frame (Fig.3).
4. Attach the canvas to the seat frame.
Using both hands, pull the seat canvas forward just to the top of the footrest frame, wrap the two lower
canvas flaps around the seat frame then secure them using the hook and loop fasteners (Fig.4).
Seat canvas
Fig.3
Seat frame
Fig.4
5