Human Touch Perfect Chair PC-420 Mode D'emploi Et D'entretien page 6

5. Secure the canvas to the end of the footrest frame.
Using both hands, pull the canvas firmly toward the end of the seat frame as far as it will go, then wrap
the flap around the frame and secure it using the hook and loop fasteners (Fig.5).
6. Secure the canvas to the sides of the footrest frame.
Pull the flap on each side of the canvas firmly outward, then wrap it around the footrest frame and
secure it using the hook-and-loop fasteners (Fig.6).
humantouch.com
Fig.5
Fig.6
6
Install the headrest frame
1. Raise the chair to an upright position.
To better position the chair for the headrest frame
assembly, pull up on the recline lever and then
raise the chair to the upright position. (Fig.7).
2. Remove the headrest frame screws.
Using the Phillips-head screwdriver (provided), remove the two screws from the headrest frame. Retain
them for use in step 4 (Fig.8).
Fig.8
Fig.7
7