Pentax HP Serie Instructions D'utilisation page 69

8. SET DISMANTLING
ATTENTION!
PUMP DISMANTLING MUST BE IN COMPLIANCE WITH ALL SAFETY NORMES
SHOWN IN CHAPTER 3 AND VALID FOR ASSEMBLY AS WELL.
Pump dismantling, as well as pump assembly, must be carried out by skilled and
authorized technicians.
Metallic parts can be disposed as scrap iron.
In any case, all the materials rising from the disposal must be disposed of in
compliance with the norme in force in the country where the pump is installed.
9. SPARE PARTS
Overhaul and repair of the pump must be carried out by the manufacturer or by his
authorized workshop referring to the assembling and disassembling manuals and to the
spare parts lists.
Spare parts replacement and repair interventions must be in accordance
with all the safety precautions indicated in chapter 6 "MAINTENANCE"
and chapter 3 "SAFETY".
• PROCEDURE FOR SPARE PARTS ORDER
Spare parts must be ordered as follows:
– specify the series number both of the motor and of the respective pump.
– specify the manufacturing year.
– specify the required part code reference
(see tables in the technical catalogues or in the exploded views)
– specify the required quantity.
Enquires must be addressed to the Manufacturer or to the authorized
Distributor.
34