Bosch SBH301 Mode D'emploi page 32

32/148 Bosch Rexroth AG
4 Mounting Instruction
4.1 Assembly height
The power isolation equipment (main switch
Q0) must be installed at a height of 0.6 m to
1.9 m as per the EN60204-1. The assembly
height of the system boxes is to be designed
in accordance with this regulation.
The system boxes must be
screwed onto the locking de-
vice (see following assembly
B
drawings), in order to prevent the
system boxes from being acciden-
tally lifted out of the suspension
rails .
A
Figure 1: Assembly drawing with suspension rails
Suspension rail suppliers:
Firma Häfele GmbH & Co.
Adolf-Häfele-Straße 1
D-72202 Nagold
Suspension rail (2,5 m) Order No.: 290.09.901
SBH.../SB... | 3 609 929 816/2009-02
Suspension rails with the appropriate length
are provided with the system boxes.
Suspending the system box is only
permitted with the suspension
rails provided or with suspension
rails from the suppliers named be-
low!
A
and locking device B