PRO-POINT 8611311 Manuel D'utilisation page 11

V1.0
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing part before
operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make sure that
all items in the parts list are included.
Contents:
• 180 Multi-Process MIG-ARC-TIG Welding Unit
• Ground Lead and ARC Lead Set
• 2 V-Groove Drive Rollers, 0.6 to 0.8 mm and 0.8 to 1.0 mm
The TIG torch, accessories and parts are sold separately.
IDENTIFICATION KEY
A Digital Volts Meter
B Digital Amps Meter
C 2T/4T Selector Button
D Wire Speed / Amps Adjustment Knob
E Voltage / Downslope /ARC Force
Adjustment Knob
F Welding Mode / Smartset Selector Knob
G Negative Output Terminal (-)
H Euro MIG / TIG Torch Connector
(MIG/MAG)
I Positive Output Terminal (+)
Visit www.princessauto.com for more information
180 MULTI-PROCESS MIG-ARC-TIG WELDER
Fig. 1
• MIG Torch
• 115V/230V Adapter
• Regulator
Fig. 2
J Weld Power Lead
K Power Switch
L Gas Inlet
M Fan
N Input Power Cable
O Data Plate
P Spool Gun/Standard Selector Switch
Q Inch Wire Feed Button
R Gas Check Button
S Spool Holder Assembly
T Wire Feed Assembly
8611311
Fig. 3
11