Publicité
Les langues disponibles
Les langues disponibles
ADDITIONAL SAFETY
RULES FOR YOUR
CIRCULAR SAW
1.
Only use saw blades recommended in the
specification.
2.
Do not use any abrasive wheels.
3.
Use only blade diameter(s) in accordance with
the markings.
4.
Identify the correct saw blade to be used for the
material to be cut.
5.
Use only saw blades that are marked with a
speed equal or higher than the speed marked
on the tool.
GENERAL SAFETY
WARNINGS
1)
WARNING: Risk of fire and burns. Do
not disassemble, heat above 100°C
(212°F), or incinerate. Do not expose cells
or batteries to heat or fire. Avoid storage
in direct sunlight.
2) Dispose of used battery promptly.. When
disposing of secondary cells or batteries,
keep cells or batteries of different
electrochemical systems separate from
each other.
3) Keep battery out of reach of children and
in original package until ready to use.
4) Never put batteries in mouth. If
swallowed, contact your physician or
local poison control center.
5) CAUTION – The battery used in this device
may present a risk of fire or chemical burn
if mistreated. Replace battery with WORX
only. Use of another battery may present a
risk of fire or explosion.
6)
WARNING: Do not use a visibly
damaged battery pack or appliance
as applicable.
7)
WARNING: Do not modify or attempt
to repair the appliance or the battery
pack as applicable.
8) BATTERY MUST BE RECYCLED.
9) Do not short-circuit a cell or battery. Do
not store cells or batteries haphazardly in
a box or drawer where they may
short-circuit each other or be
short-circuited by conductive materials.
10) Do not subject cells or batteries to
mechanical shock.
11) Keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean
dry cloth if they become dirty.
12) Do not maintain secondary cells and
batteries on charge when not in use.
13) Retain the original cell and battery
literature for future reference.
Cordless Circular Saw
14) Do not use any charger other than that
specifically provided for use with the
equipment. Secondary cells and batteries
need to be charged before use. Always use the
correct charger and refer to the manufacturer's
instructions or equipment manual for proper
charging instructions.
15) When possible, remove the battery from the
equipment when not in use.
16) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to battery pack, picking up or carrying the
appliance. Carrying the appliance with your
finger on the switch or energizing appliance
that have the switch on invites accidents.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
Do not burn
Li-Ion battery, battery must be
recycled.
Li-I on
5
EN
Publicité
