Laterals Installation (Optional) - Physipro Axis Manuel D'utilisation

Owners manual

4. Laterals installation (optional)

1) Install the anchoring mechanisms at a predetermined height by tightening the
clamp with a 4mm Allen key. (Figures 4, 5 and 6)
Screws A are used for the final height and depth adjustments.
Screw B is used for the angle and thorax adjustments.
Screws C are used for the width adjustment.
Note: Use the right screw length that fit the backposts size.
A
A
B
Figure 5
C
C
Figure 4
5
ENGLISH
Figure 6
Revision 1
October 2014