Introduction; Intended Use; Parts Description; Technical Data - SilverCrest SDB 1500 A1 Instructions D'utilisation Et Consignes De Sécurité

Introduction

Steam Mop SDB 1500 A1
Introduction
Congratulations on your new product. You have
selected a high quality product. Please familiarise
yourself with the appliance before preparing it for
use and using it for the first time. To do so, please
carefully read the following operating instructions
and the important safety information. Use the prod-
uct only as described and for the indicated pur-
pose. Keep these instructions in a safe place. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation.

Intended use

The steam broom is suitable for use as a brush and
a floor cleaner. The turbo brush removes dirt and
dust from the floor and collects it in a dust container.
It is not suitable for removing bulky or heavy ob-
jects. The steam function facilitates a thorough
cleaning of floors made from marble, stone, tiling,
parquet and hardwood under the condition that
the flooring material has been treated and is imper-
meable to water. The pad absorbs excess moisture.
The device uses the active steam output for clean-
ing, without using soaps or cleaning agents.
The device is only suitable for household use.
No other use is intended by the manufacturer. For
this reason the manufacturer accepts no liability for
any kind of damage which occurs to the device as
a result of non-intended use. The warrantee be-
comes void following any non-intended use.
RESIDUAL RISKS
ATTENTION!
Do not use the device on waxed surfaces. The wax
will be removed by the heat and steam. Do not use
the device on untreated or water permeable floors.
Do not leave the device in operation in the same
spot for an extended period of time as the wood
may be caused to swell.
We recommend that you test the device on an area
of the floor which is out of view.
38 GB
114903_silv_Dampfbesen SDB 1500 A1_content_DE_AT_CH.indd 38
Alternatively please consult your flooring manufac-
turer to ask for the modes of cleaning for your floor
material.

Parts description

Handle release button
1
Motor body
2
Cable winder
3
Connecting lead with mains plug
4
ON/OFF switch turbo brush
5
Dust collector
6
Brush protector
7
Pads
8
White pad for hard floors
8a
Blue pad for soft floors
8b
Steam base
9
Filter
10
Water tank
11
Release lever for water tank
12
Function display
13
Cable winder, pivotable
14
Handle
15
Steam switch
16
Attachment for carpet cleaning
17
Turbo brush
18
Felt for pad attachment
19
Steam jets
20
Retaining screw
21

Technical Data

Power supply: 220–240 V ∼ 50 / 60 Hz
Output: 1500 W
Protection type: IPX 4
Protection class: l/

Scope of delivery

1 steam broom
1 attachment for carpet cleaning
1 soft pad for hard floors
1 blue pad for soft floors
09.06.15 08:55