READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
GENERAL SAFETY INSTRUCTIONS (Cont.)
B. Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Follow
the heating equipment manufacturer's guidelines
and safety standards such as those published by
the National Fire Protection Association (NFPA), and
the American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the local
code authorities. When applicable, install any makeup
(replacement) air system in accordance with local
building code requirements. Visit Monogram.com for
available makeup air solutions.
C. When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
D. Ducted fans must always be vented to the outdoors.
49-80565-5
IMPORTANT SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE,
USE ONLY METAL DUCTWORK.
hood unless it is specifically recommended in this
manual. All other servicing should be referred to a
qualified technician.
CAUTION
AUTOMATICALLY
OPERATED DEVICE. TO REDUCE THE RISK OF
INJURY, DISCONNECT FROM POWER SUPPLY
BEFORE SERVICING. THE UNIT IS EQUIPPED
WITH AN INTEGRAL DISCONNECTING SWITCH
LOCATED INSIDE THE BLOWER HOUSING.
5