Content Of Packing; Installation - Sonnenkonig VENUS Mode D'emploi

2. Content of packing

GB
Heater
Wall fixing accessory
(4X)

3. Installation

A wall mounting bracket is provide with the heater which
has been specifically designed to allow this product to
be fitted to a wall or ceiling before drilling the holders
for the wall/ceiling is solid and that there are no hidden
water pipes or electric wires.The heater must be installed
no less than 16'' form side walls and no less than 6"' off
the floor.
Important: Ensure that the supply cables is well moun-
ted and that it does not come into contact with reflector
of the heater or that is does not trail into heated area, the
supply cable can be fixed to them metal mounting bracket behind heater with plastic zip ties.
Screw (4x)
38
Knurled screw (2x) Remote control