General Safety Instructions; Function And Product Characteristics - Trotec IDE 20 D Manuel D'utilisation

03. General safety instructions

m Please observe the following safety instruc-
tions! Any non-compliance with these in-
structions may have serious consequences
for the health of persons and could result in
property damage and damage to the envi-
ronment.
Risk of explosion!
• Do not operate the device in potentially flammable
or explosive environments. Do not install it in such
environments either.
• Do not place the device on a flammable surface.
• Remove any inflammable materials and chemicals
from the immediate operating environment.
Functional impairment of and damage to the device!
• Do not use the device outdoors.
• Install the device in a stable position.
• Keep the intake and exhaust openings free.
• Do not cover the device during operation.
• Only disconnect the device from the mains once it
has cooled down completely.
• Do not use any chemicals for cleaning the device.
Risk of injury and damage to property due to de-
fective devices!
• Before each use of the device, check its accesso-
ries and connection parts for possible damages. Do
not use any defective devices or device parts.
• Do not use the device if you detect any damage to
its plug and cables. Defective power cables repre-
sent a serious health threat.
Danger to life through electrical shock!
• Only connect the device to power sources that are
in good technical order. Do not use damaged wall
outlets!
• Pull the connection cable out of the wall outlet by
pulling it at its plug.
• Do not touch electrical connection cables when
your hands are wet!
B - 2
• Protect the electrical connection cables against
damage caused by, for example, animals.
• Do not carry out any changes or repairs on the
device!
• Do not expose the device to any liquids.
• Do not apply any liquids to the interior of the de-
vice. If this does happen nevertheless, pull out the
power cord and have the device checked by a spe-
cialist workshop.
Risk of injury!
• Do not insert any objects into the intake and ex-
haust opening of the device.
• Do not reach into the existing openings.
• Do not leave children or animals unattended near
the operating device!
• Do not operate the device in rooms with insufficient
supply of combustion air.
• Avoid the improper use of fuels.
Risk of environmental pollution!
• Do not let any leaked fuel seep away into the soil
and prevent it from entering the sewer system

04. Function and product characteristics

The oil heating unit IDE 30, IDE 50 and/or IDE 30 is
used to heat up room air in order to achieve a fast
heating of large rooms.
The oil heating unit is operated with heating oil. The
device features an indirect combustion and is provid-
ed with an exhaust connection in order to discharge
the exhaust gas via the chimney.
Operating Manual – IDE 20 D/ 30 D / 50 D / 70 D EN