gdw 1263 Instructions De Montage page 5

Toyota RAV 4
2000 - ....
Ref. 1263
Fitting instructions
1) Permanently remove the towing ring on the side of the vehicle.
2) Assemble the foot of the ball on the points (*). Place on the tube mounting piece (3). Tighten firmly.
3) Place the towbar with (A) on the provided screw-thread holes in the underside of the chassis. Place the
mounting piece (2) with the points (A) and (B) on the points (A) and (B) of the towbar. Insert all bolts
with washers and tighten everything firmly.
Composition
1 towbar reference 1263
1 ball T43XL028
4 bolts M12x90 (DIN931)
4 bolts M12x1.25x45
4 nuts M12
8 security washers M12
8 washers 37x13x3
2 bolts M10x35
4 washers 30x10x10.5x2.5
2 security washers M10
2 nuts M10
1 mounting piece (3)
2 mounting pieces (2)
1 Security shackle (800053)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(B)
(*)
(A)
(*)
(A-*)
(A-*)
(B)
(B)
(B)
(B)
(*)
(A-B)
(*)
All bolts and nuts : quality 8.8