Unlocking All Volume Control (Restoring Default Setting); Using Macros - One for All kameleon URC-9966 Guide D'utilisation

All manuals and user guides at all-guides.com
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 29 Friday, May 6, 2005 8:03 PM
4. If desired, repeat steps 2 through 3 (of this section) for each device that
you want volume to be unlocked.
5. To exit programming, press HOME once.The display returns to the last-
selected device menu screen
Now, after you select a device that has volume unlocked, pressing VOL ,
6.
VOL , or MUTE controls the device's volume only in its own mode.
U A V C
NLOCKING LL OLUME ONTROL
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly:
2. Press VOL once.The Volume Lock programming screen appears:

USING MACROS

The OFA Kameleon 8-Device Remote with RF includes five Macro Keys, M1
through M4 and POWER. Each one can be set up to perform a repetitive, time-
consuming operation with the press of a single key.
NOTE: A macro programmed onto the POWER key can only be accessed in
the HOME THEATER mode. Pressing it in any other mode only sends a "Power
On/Off " IR command to the selected device.
Using Macros
U
SER
.
(
R D S
ESTORING EFAULT ETTING
3. Press VOL once.The two bottom IR
segments flash four times and the
Program Keys appear again.
4. To exit programming, press HOME
once.The display returns to the last-
selected device menu screen
5. Volume is again independently
controlled according to its default states
for all programmed devices.
' G
S UIDE
)
.
29