Setting up the ONE FOR ALL 5
(How to set up the ONE FOR ALL 5 to control your devices)
Example: To set up the ONE FOR ALL 5 for your Television:
1
2
3
4
_ _ _ _
5
6
Turn your device back on and try all the remote's functions to ensure they
are working properly. If the functions do not work properly, repeat steps
1-5 using another code listed under your brand.
7
If your device does not respond, follow steps 1 to 5 with each
code listed for your brand. If none of the codes listed for your
brand operate your device, or if your brand is not listed at all, try
the Search Method described on page 7.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under your
brand.
- If your device's original remote control does not have a POWER key, press PL Y
instead of POWER when setting up your device.
- Remember to press the corresponding device key before operating your device.
Devices can be found under the following keys:
Television
Satellite Receiver (also DVBT*) /
Cable Converter
Video ccessory
* DVBT codes (Digital Terrestrial / Free View) can be found in
the "Satellite Receiver" section.
To set up a second TV, VCR, SAT, DVD or AMP see page 12.
6
Find the code for your device in the Code list (page 18 –
37). Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your
device is switched on (not on standby).
Press the TV key on the ONE FOR LL 5 for the device you
wish to Set-Up.
Press and hold down MAGIC until the ONE FOR ALL 5's
TV key blinks twice (the red LED underneath the TV key will
blink once and then twice).
Enter your four-digit device code using the number keys.
The device key will blink twice.
Now, aim the ONE FOR LL 5 at your device and press
POWER. If your device switches off, the ONE FOR ALL 5
is ready to operate your device.
Video Recorder
DVD / DVD-R
mplifier
mp. / Tuner
Miscellaneous udio
WWW ONEFORALL COM