Searching For Your Code - One for All kameleon URC-9966 Guide D'utilisation

All manuals and user guides at all-guides.com
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 19 Friday, May 6, 2005 8:03 PM
3. Press DEV SET once.The Device Setup programming screen appears:
If the code works, Press OK once. The two bottom IR segments will flash
7.
twice.
8. To exit programming, press HOME twice. The display returns to the last-
selected device menu screen.

SEARCHING FOR YOUR CODE

If your device does not respond after trying all codes listed for your brand, or
if your brand is not listed at all, try searching for your code. For example, to
search for a code for your TV:.
NOTE: Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear
as SETUP flashes repeatedly.
Searching For Your Code
U
SER
4. Press DVD once (or VCR if your combo
device uses a VCR Code). The key will
animate.
5. Use the "Setup Codes For DVD Player/
VCR Combos" (on page 132) to locate
the brand name and then use the
Number Keys to enter the first code for
your device. If performed correctly,
the two bottom IR segments flash
twice.
NOTE: If the two bottom IR segments
displayed one long flash instead, an
error has occurred. Try entering the
same code again.
6. Aim the remote control at the device
and press POWER once. The device
should turn off.
' G
S UIDE
19