Adjusting How Long The Screen Light Is On - One for All kameleon URC-9966 Guide D'utilisation

All manuals and user guides at all-guides.com
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 14 Friday, May 6, 2005 8:03 PM
K 8-D
AMELEON
A H L T S
DJUSTING OW ONG HE CREEN
The OFA Kameleon 8-Device Remote with RF allows you to control how long
the screen light remains on after the last button is pressed. The display-on
time is set at the factory to run for about 8 seconds. To increase or decrease
that time, perform the following steps:
NOTE: Increasing the display on time can decrease battery life.
1. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
NOTE: . If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step.
2. Press OTHER once.The Other programming screen appears:
5. Press HOME twice to exit programming and return to the last-selected
device menu screen.
14
R
EVICE EMOTE WITH
L O
IGHT IS N
3. Using the Number Keys, enter 9 7
8.The bottom two IR segments flash
twice and display the Other screen
again.
4. Use the following table to choose the
"light on" time:
Press... ...to set the light for
1 4 seconds
2 8 seconds
3 12 seconds
4 16 seconds
5 20 seconds
Adjusting The Display
RF