Programming A Learning Key - One for All kameleon URC-9966 Guide D'utilisation

All manuals and user guides at all-guides.com
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 33 Friday, May 6, 2005 8:03 PM
• Do not use the following keys for learning: Device Keys, M1~M4, SETUP,
FAV, SCROLL, PRESET, PVR VOD, or Record (•) Key.
• Learning capacity is approximately 50 to 75 keys, depending on the
code being learned.
• If both learned and keymoved functions are assigned to the same key,
the last programmed function is stored.
• A learned function cannot be used as a source for Keymover (see "Using
Keymover" on page 36).
• Certain device codes are not learnable including multi-frequency types,
some high frequency ones, and other unusual formats.
• For optimum learning, avoid high levels of ambient light such as natural
sunlight or energy-efficient fluorescent lights.
NOTE: . Please have your original remote controls handy before programming
learning. Be sure to press each teaching key within 5 seconds of the previous
entry. Otherwise, the OFA Kameleon 8-Device Remote with RF exits
programming mode.
P L K
ROGRAMMING A EARNING EY
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear as
SETUP flashes repeatedly.
2. Press IR LRN once.The IR Learn programming screen appears:
Using Learning
U
SER
3. Press a device key once (i.e., AUX, CBL/SAT,
CD, TV, DVD, AUDIO, VCR, or PVR) to assign
a mode for learning.The selected device
menu screen, including HOME, appears.
' G
S UIDE
33