Angelcare AC601-A Manuel Du Propriétaire page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
Turn the Nursery Unit sensitivity dial from less
sensitive (0) to very sensitive (5).
NOTE:
If you are experiencing false alarms,
adjust the Sensitivity level.
For better result, start by half level
increases or decreases.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's
crib and store it away.
5.2 - OUT OF RANGE
Your monitor has an Out-of-Range function that advises you when your two units
are not communicating. Out-of-Range situations can be caused by distance or by
physical interferences.
RANGE:
Open field (Open area without obstructions): up to 250 meters (820 feet).
TO ACTIVATE THIS FUNCTION:
Press and hold the Nursery Unit Night
Light button for 2 seconds.
The Out-of-Range Indicator (orange)
on both units will light up to display
function's activation.
TO STOP THE OUT-OF-RANGE ALARM:
Turn the Parent
Unit OFF
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
16
OR
Turn the Nursery
Unit ON
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound. Turn the Nursery Unit ON again to reconnect both
units. To reactivate the Out-of-Range function, follow steps above. If you turn the
Parent Unit OFF, the Out-of-Range function will be deactivated but the orange light will
stay lit on the Nursery Unit. To reactivate this function on the Nursery Unit follow steps
above.
5.3 - SOUND
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 10 feet
(3 meters) apart.
TO ADJUST SOUND LEVEL:
Slide Parent Unit Volume/Power button
upward or downward.
5.4 - NIGHT LIGHT
Press the Night Light button on the Nursery Unit
to turn it ON or OFF.
NOTE:
If you press Night Light button for more
than 2 seconds Out-of-Range function
automatically activates.
IF YOU HEAR NO SOUND:
• Check that both units are switched ON.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
E
N
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières