Graco GH 833 Fonctionnement page 30

PROBLEM
The sprayer overheats
Spitting from gun
Excessive hydraulic pump noise
*Check hydraulic fluid level often. Do not allow it to become too low. Use only Graco approved hydraulic fluid, page 7.
30
CAUSE
Paint buildup on hydraulic
components
Oil level is low
Air in fluid pump or hose
Loose intake suction
Fluid supply is low or empty
Low hydraulic fluid level
Troubleshooting
SOLUTION
Clean
Fill with oil.
Check for loose connections on
siphon assembly, tighten, then
reprime pump
Tighten
Refill supply container
Turn sprayer OFF. Add fluid*
311279F